Profiline CutMax

Profiline CutMax 06-04 is fast-acting and outstanding quality surface finish for car detailing. This car detailer removes scratches and inclusions from refinishing work or the original factory paintwork. Sonax CutMax is a low-dust, highly abrasive cutting compound for polishing sanded or severely weathered paint surfaces. This odorless, silicone-free compound has a long buffing cycle, resists dusting, and wipes off easier than any compound has the right to. Unlike most high abrasive polishes, this car detailer leaves a sensational finish with very strong abrasive power. CutMax Cutting Compound is strong enough to remove 1,000 grit sanding marks on fresh paint. Additionally, there is dust reduction to a minimum, which improves cleanliness.

Sonax CutMax is excellent for achieving the highest cutting and polishing results without severely damaging the clear coat. Sanded areas up to P1500 can quickly and safely removable with excellent gloss effect. CutMax is water-based which offers a long working window and will not dry out like other compounds. It is also dust-free for easy clean up after use. It leaves minimal treatment marks and virtually no polish residues (Low Dust Technology!). Solvent-free & silicone-free makes it safe for use in body shops and collision centers.

You can apply CutMax Cutting Compound with a rotary or dual action polisher. Depending on the level of cut you desire, use with a foam or wool pad. Regardless of the pad you choose, Sonax CutMax will impress you with its long buffing cycle and easy wipe off.

Directions for use Profiline CutMax:

• Firstly, apply a small amount (3 or 4 Dime-sized drops) of polish onto the Polishing Pad.
• After that, polish the surface at a low rotating speed (800 rpm) for approximately 20-30 seconds, applying 15-20 pounds of pressure.
• After 30 seconds, remove pressure completely using only machine weight, increase machine speed (1200 RPM) and continue polishing for 45-60 seconds.
• When finished polishing, wipe down the paint surface with a SONAX Ultra-fine Microfiber Cloth.

Please note:

• Do not allow polishing area to overheat.
• Regularly clean polishing sponges.
• Never use different polishes on one sponge.
• Keep from freezing.