Lambskin Pad is a dense, high quality lambskin for professional polishing with a polishing machine. It enhances the cutting efficiency of abrasive polishes, and simultaneously reduces the polishing temperature. The lambskin pad is durable and chained around the edges to prevent fraying. Velcro layer on the back allows for non-slip attachment to support plate and also enables rapid pad change.
Improves the abrasion capacity of abrasive polishes, while reducing the surface heating of the paintwork. Ideal for efficient paint correction to remove severe weathering, deep scratches and sanding by using Profiline Ultimate Cut and Profiline CutMax.
Sonax lamb’s wool pad improves the removal performance of abrasive polishes. In addition, it`s ideal for processing heavy cut polishes, coarse and fine abrasive pastes for quick and reliable paint correction. Altogether, in conjunction with eccentric polishing machines and rotary polishers. You can achieve the maximum effect with a rotary machine.
2 sizes of Sonax Lambskin Pad:
1) 80 mm / 3.14 in. (4 pads in pack).
2) 133 mm / 5.23 in.
Please note:
- Sonax lambswool pad does NOT have a foam intermediate layer and offers a minimal distance between the Velcro plate and the paint. Extreme caution is therefore required when using it on uneven surfaces.
- The use of Sonax lamb’s wool pad results in a very high amount of paint removal but usually also the matting and holograms. You can remove them in the finish step with a high-gloss polish and a soft polishing sponge.
Directions for use:
- Firstly, place the pad centrally on the support plate.
- Apply only a little pressure when polishing.
- To clean the pad in between, always blow out with compressed air or press on a soft edge and spin out.
- To clean at the working end wash out the pad immediately after polishing, then spin out. and allow to dry. Do not place the pad in the sun or on a radiator to dry.
david mendez –
Perfect!
david mendez –